Perfect flexible height carrier provides your pet protection while conforming to different spaces - like under the seat of an airplane.
Super light in weight, only 2 lb. 7 ounces, with a rigid foam core base, and top quality durable materials made to last from award-winning Sturdi Products, Inc.
Most airlines have weight restrictions for on board pet travel. Using a SturdiBag you already gain several pounds to your advantage over other carriers. (Always check with your airline before travel for their policies).
SturdiBags are for much more than airline travel. Use for pet shows, or traveling around town. The built in seatbelt loops, or corner anchor loops, enable you to secure the carrier in your car. Washable by hand or machine, and comes with a limited lifetime warranty.SIZES: Small:
18"L x 10"W x 10"H - for pets up to 12 pounds.Large:
18"L x 12"W x 12"H - for pets up to 20 pounds.
Note: We've taken the guesswork out of setup. Watch the video to learn the easy way to assemble your SturdiBags. Use a hard surface when inserting roof rods.
HOW TO ASSEMBLE STURDI BAGS: How to Assemble Your SturdiBag™
- Comfort fleece pad filled with cushy, convoluted foam pets love (washable)
- Privacy flaps
- Zippered back pocket
- Padded shoulder strap - adjustable
- Leather hand grip
- Safety tether strap (use with a harness, not collar)
- Seatbelt safety loops
- Zipper locks (for those escape artists)
Watch our video, or follow these instructions...STEP 1
Unzip the front door and place the zippered pocket end on a hard surface.STEP 2
Look inside and locate the two sets of rod guides located on either side of the mesh roof windows.STEP 3
Insert the first rod all the way through the guides.STEP 4
Press the rod down against a hard surface so it will flex enough to place the end in the tab pocket near the entrance opening.STEP 5
Repeat the process with the second rod.STEP 6
Unzip the base pocket and insert the ultra light foam core base. Zip closed.STEP 7
Place pad inside on carrier floor while aligning the velcro and press into place.STEP 8
Adjust the length of the 4-point shoulder strap by sliding the webbing through the tri-bar on each strap.Use of the Tether Strap
Pull back the fleece pad to expose the "D-Ring" on the floor of the carrier. Attach one end of the tether strap to to this d-ring and the other to your pet's harness. A collar is not recommended.
CARE & CLEANING:
Before washing, remove the shoulder strap, pad and the flexible roof rods. Hand or machine wash on gentle cycle with cold water using soap or non-bleach detergent. Hang to dry out of direct sunlight. Animal hair and lint may be removed from Velcro with a stiff brush. Wash Pad separately.
Fleece Floor Pad
Machine wash on gentle cycle with cold water using soap or non-bleach detergent. Tumble dry with low heat.