- Comfort fleece pad filled with cushy, convoluted foam pets love (washable)
- Privacy flaps
- Zippered back pocket
- Padded shoulder strap - adjustable
- Leather hand grip
- Safety tether strap (use with a harness, not collar)
- Seatbelt safety loops
- Zipper locks (for those escape artists)
How to Assemble Your SturdiBag™
Watch our video, or follow these instructions...
Unzip the front door and place the zippered pocket end on a hard surface.
Look inside and locate the two sets of rod guides located on either side of the mesh roof windows.
Insert the first rod all the way through the guides.
Press the rod down against a hard surface so it will flex enough to place the end in the tab pocket near the entrance opening.
Repeat the process with the second rod.
Unzip the base pocket and insert the ultra light foam core base. Zip closed.
Place pad inside on carrier floor while aligning the velcro and press into place.
Adjust the length of the 4-point shoulder strap by sliding the webbing through the tri-bar on each strap.
Use of the Tether Strap
Pull back the fleece pad to expose the "D-Ring" on the floor of the carrier. Attach one end of the tether strap to to this d-ring and the other to your pet's harness. A collar is not recommended.