HOW TO ASSEMBLE STURDI BAGS:
How to Assemble Your SturdiBag™
- Comfort fleece pad filled with cushy, convoluted foam pets love
- Privacy flaps
- Zippered back pocket
- Padded shoulder strap - adjustable
- Leather hand grip
- Safety tether strap (use with a harness, not collar)
- Seatbelt safety loops
- Zipper locks (for those escape artists)
Watch our video, or follow these instructions...STEP 1
Unzip the front door and place the zippered pocket end on a hard surface.STEP 2
Look inside and locate the two sets of rod guides located on either side of the mesh roof windows.STEP 3
Insert the first rod all the way through the guides.STEP 4
Press the rod down against a hard surface so it will flex enough to place the end in the tab pocket near the entrance opening.STEP 5
Repeat the process with the second rod.STEP 6
Unzip the base pocket and insert the ultra light foam core base. Zip closed.STEP 7
Place pad inside on carrier floor while aligning the velcro and press into place.STEP 8
Adjust the length of the 4-point shoulder strap by sliding the webbing through the tri-bar on each strap.Use of the Tether Strap
Pull back the fleece pad to expose the "D-Ring" on the floor of the carrier. Attach one end of the tether strap to to this d-ring and the other to your pet's harness. A collar is not recommended.
CARE & CLEANING:
Before washing, remove the shoulder strap, pad and the flexible roof rods. Hand or machine wash on gentle cycle with cold water using soap or non-bleach detergent. Hang to dry out of direct sunlight. Animal hair and lint may be removed from Velcro with a stiff brush. Wash Pad separately.
Fleece Floor Pad
Machine wash on gentle cycle with cold water using soap or non-bleach detergent. Tumble dry with low heat.