Odor and Stain Remover:      16.9 fl.oz. (500 mL)      1 Gallon Refill (3.78 Liters)**

See also:  (SNIFF for "Urine-Off")    • Carpet Injector Bottles      • Urine Finder UV Light    • Stain and Odor Wipes

** The gallon size may be used as a refill for the spray bottle or the injector cap bottles. Or, for larger jobs, we recommend the hand-held Power Sprayer. It doesn't get any better than this!
SAVE when you buy both together!

Pee Scene Investigation:

   You will not find another product like this on the market today and here’s why. After several years of research and development Urine-Off has discovered the proper bio-enzymatic solution which breaks down the non-soluble urine crystals – new or old, it doesn’t matter how long the stain has been there, Urine-Off can permanently remove the stain and odor – GUARANTEED!

   Urine-Off is so confident their product works they have developed a special Urine Finder light. You can create your own PSI – (Pee Scene Investigation) by using the Urine Finder UV black light to find sources of urine odor, and use it to follow up after treatment, to make sure it’s gone.
 
   Once you know where the source is you can treat only that area saving you time and product, by not using more than you have to by guessing. Be sure to follow the directions on all the packages, or use the guidelines found right here.

General Use Instructions    (top)    Linens       Furniture
Carpet         Hardwood Floors          Concrete         Tile

---

GENERAL USE:

1. Urine-Off must contact all urine deposits on or in the surface, however far these deposits may have soaked in. Different surfaces require different techniques.
2. Urine-Off must remain wet and in contact with the urine deposits long enough for the bio-enzymes to complete their work on the urine crystals.
3. In certain cases where deposits are heavy, very old, or other urine odor/stain products have been used, more than one Urine-Off treatment may be needed.

               General Rules for Urine-Off:

• Soak it, and allow to air-dry
• Repeat as necessary
• The more absorbent the material, the more Urine-Off will be required.
• NEVER spray on pets or people. Urine-Off is mild and safe to use around pets and people but is not designed for topical use!
• ALWAYS check fabrics for colorfastness in an inconspicuous area. Again, Urine-Off is mild and safe to use on water-safe surfaces, but play it safe and test first!
• Do NOT use directly on pet litter - this is ineffective. If the litter has a urine odor, change it. Urine-Off is great for the litter pan itself, however (details below).
• NEVER use other cleaners or chemicals of any kind at the same time as Urine-Off - this will reduce its effectiveness. Use Urine-Off first! If other chemicals have already been applied, be sure to rinse repeatedly to remove all traces and allow to dry completely before using Urine-Off!

---

LINENS: Clothing / Bed Linens / Towels

1. 1. Saturate the entire affected area where urine may have come into contact on the laundry with Urine-Off. Use the Urine-Off Black Light to locate the difficult to find odors, helping you to treat at the source and save product.
2. 2. Allow to sit for 15 to 30 minutes before washing.
3. 3.For particularly stubborn odors and stains, saturate and place in a plastic bag overnight. This will keep Urine-Off moist longer, allowing the bio-enzymatic action to completely break down the odor and stain.

<back to top>

---

FURNITURE: (and Mattresses)

Always check for colorfastness! For specific treatment of more delicate furnishings, such as leather, always consult first with the manufacturer or store where you bought the item. As a general rule, Urine-Off will do no more harm to the surface of leather or fabric than water would -- and especially not as much harm as the burning acidity of dried urine. 

    For fresh urine deposits 

• Do not use any other cleaners or chemicals, nor should you shampoo the affected area. If you plan to have the piece of furniture cleaned, do this only after you have removed all urine odor and stain with Urine-Off. 
• Soak up as much urine as possible by blotting with paper towels. 
• Use the "stream" setting on nozzle and saturate the urine stain and the underlying padding (if applicable) with Urine-Off. (Urine-Off must contact all of the urine-soaked material completely to remove the odor and stain. For mattresses and heavily padded furniture, ensure that Urine-Off soaks through to the pad as much as the urine would have originally soaked through. Use your Urine-Off Black Light to specifically identify surface areas of contamination.) 
• Allow to air dry 
• After urine odor and stain are removed, remove residue by applying a small amount of water to the area and blotting it up with a paper towel. It is important to remove the residue or the area may attract dirt.

   For old dried urine stains  

• Be aware that long-term urine exposure can actually burn leather, the dyes in the fabric of the furniture or the mattress. Such damage is not common, but even the most complete urine removal cannot reverse it. 
• Do not use any other cleaners or chemicals! If you plan to have the item professionally cleaned anyway, do this only after you have removed all urine odor and stain with Urine-Off. 
• Strongly recommended: Use a Urine-Off Black Light to locate all affected areas (for details, see the Black Light section of these instructions). 
• Use the "stream" setting on nozzle and saturate stained material and underlying padding (if applicable) with Urine-Off. 
• Urine-Off must contact all of the urine soaked material completely to remove the odor and stain. For mattresses and heavily padded furniture, ensure that Urine-Off soaks through to the pad as much as the urine would have originally soaked through. Use your Urine-Off Black Light to specifically identify surface areas of contamination. 
• For particularly old or difficult stains, saturate the area and cover with plastic wrap for 24 to 48 hours, allowing Urine-Off to stay moist longer. 
• Note that as the first application of Urine-Off goes to work, the urine odor may actually intensify at first. This is normal with old or heavy urine deposits, and indicates that the urine is being broken loose and is rising to the surface. The plastic will also help to draw the urine to the surface. 
• Allow to air dry. 
• Repeat application on subsequent days until stain is no longer visible (may take 3-4 applications) and odor is removed. 
• After urine odor and stain are removed, remove residue by applying a small amount of water to the area and blotting up with paper towel. It is important to remove residue or the area may attract dirt.

<back to top>

---

CARPET:

   For fresh urine deposits:

• Do not use any other cleaners or chemicals. Do not shampoo carpet or upholstery. If you plan to have the carpet or upholstery shampooed anyway, do this only after you have removed all urine odor and stain with Urine-Off.
• Soak up as much urine as possible by blotting with paper towels. Do not use your shoe to press down the paper towels, as urine residue on your shoe will track urine scent for several steps! Use your hand and then wash, or use a protective glove.
• Use the "stream" setting on nozzle and saturate the urine stain and the underlying padding with Urine-Off. (Urine-Off must contact all of the urine-soaked material completely to remove the odor and stain).
• Allow to air dry
• After urine odor and stain are removed, remove residue by applying a small amount of water to the area and blotting it up with a paper towel. It is important to remove the residue or the area may attract dirt.

   For old dried urine stains:

• Be aware that long-term urine exposure can actually burn the dyes in the carpet. Such damage is not common, but even the most complete urine removal cannot reverse it.
• Do not use any other cleaners or chemicals! Do not shampoo carpet. If you plan to have the carpet shampooed anyway, do this only after you have removed all urine odor and stain with Urine-Off.
• Strongly recommended: Use a Urine-Off Black Light to locate all affected areas (for details, see the Black Light section of these instructions above).
• Use the "stream" setting on nozzle and saturate stained material and underlying padding with Urine-Off (Urine-Off must contact all of the urine soaked material completely to remove the odor and stain).
• For particularly old or difficult stains, saturate the area and cover with plastic wrap, allowing Urine-Off to stay moist longer.
• Note: that as the first application of Urine-Off goes to work, the urine odor may actually intensify at first. This is normal with old or heavy urine deposits, and indicates that the urine is being broken loose and is rising to the surface.
• After a few hours, remove the plastic and blot the area dry with paper towels.
• Repeat application on subsequent days until stain is no longer visible (may take 3-4 applications) and odor is removed.
• After urine odor and stain are removed, remove residue by applying a small amount of water to the area and blotting up with paper towel. It is important to remove residue or the area may attract dirt.

<back to top>

---

HARDWOOD FLOORS:

Urine stains in hardwood flooring are some of the toughest stains to remove, especially if repeated soiling has turned the area black. The black staining indicates that there is a heavy build-up of dried uric salt crystals, and also that actual wood damage has taken place, as the acidic urine has burned the tannins in the wood.

Urine-Off can remove the urine odor entirely, and can also remove the buildup of dried uric salt crystals with repeated application. The damage to the wood tannins cannot be reversed, however. This means that after the black stains are removed with Urine-Off, the wood may remain a stained gray to black consistency, which represents the permanent burning causes by the uric acid. If the degree of the discoloration is unacceptable, then refinishing will be necessary. In many cases sanding can remove the damaged wood to a level that is acceptable.

Always treat with Urine-Off before refinishing, as the heat of sanding and refinishing can bake the urine crystals into the wood and make odor and stain removal much more difficult. Use Urine-Off to remove as much of the staining as possible first, using multiple applications, and less wood will need to be removed during the finishing process.

The following procedure assumes a severely stained floor; less severe urine contamination will not require as extensive a treatment:

1. Start by treating the perimeter first.
2. Next spray the entire floor until completely saturated.
3. Cover the wet floor with plastic sheeting - this slows the evaporation and allows the product to work longer. As Urine-Off breaks loose the uric crystals from the wood, the plastic will also help to draw the urine to the surface. NOTE: It is normal for the urine odor to actually become stronger at this point.
4. After 30 minutes, remove the plastic and blot the floor dry with paper towels.
5. Re-apply Urine-Off, without the plastic. The urine will continue to be drawn to the surface. After 30 minutes, blot the floor dry with paper towels.
6. Continue to apply Urine-Off and blot up after 30 minutes until all odor is removed. Each treatment will improve the condition of the surface, as evidenced by the stains becoming lighter and smaller in diameter, until all urine residue is removed.
7. Spot-treat stained areas as needed until stains are gone or have ceased to grow lighter, indicating that all urine has been removed. Allow to air dry.
8. After the final treatment, rinse with water and wipe or mop dry.

Using Urine-Off will remove the odor, reduce the staining, and provide a better starting point for refinishing or covering with new flooring. In some cases, the results can be so good the floor can be used as is! 

<back to top>

---

CONCRETE: Also Marble and Non-Glazed Tile

Unsealed concrete may appear hard and impermeable but is actually like a hard sponge, with many tiny pores. This means that urine can soak deeply into it - and that removing the urine can be challenging. Carefully follow the steps below for best results.

• Do not use any other cleaners or chemicals! Make sure the floor is dry. If there is carpet adhesive or other residue on the floor, use a scraper to remove it.
• Sweep thoroughly to remove all loose debris and dirt. Dispose of all loose material in the garbage • Strongly recommended: Use a Urine-Off Black Light to locate all affected areas (for details, see the Black Light section of these instructions above).
• Spray the affected surface liberally with Urine-Off using a pump sprayer.
• Cover with plastic sheeting for 1 to 2 hours. This slows the evaporation of Urine-Off and allows time for the first application to soak deeply into the concrete.
• Note that as the first application of Urine-Off goes to work, the urine odor may actually intensify at first. This is normal with old or heavy urine deposits, and indicates that the urine is being broken loose and is rising to the surface.
• Remove the plastic and blot the floor dry with paper towels. Frequently upon inspecting your toweling, you will find it to be colored yellow and smell heavily of urine. Dispose of the soiled towels.
• Reapply Urine-Off. Allow to dry 1 to 2 hours. (In humid climates lacking heat/AC, drying may take longer.)
• Reapply as needed, with 1 to 2 hours drying time between applications, until odor is removed.
• Once odor is removed, use a sponge mop and a minimal amount of water to remove residue from the surface.

<back to top>

---

TILE: Also Glazed Tile, Porcelain, and other hard surfaces. (For Marble and Non-Glazed Tile see Concrete).

These surfaces, though smooth, have a certain amount of porosity that allows urine crystals to accumulate. The grout can be quite porous as well! Follow these steps for hard surfaces: 

  For fresh urine deposits:

• Wipe up urine with paper towel.
• Spray surface with Urine-Off and allow to air-dry.
• Rinse surface with clean water and dry. 

   For old dried stains:

• Strongly recommended: Use a Urine-Off Black Light to locate all affected areas (for details, see the Black Light section of these instructions above).
• Spray with Urine-Off until surface is saturated.
• Allow to air dry.
• Repeat application on subsequent days until odor is gone (may take 3-4 applications).
• Rinse surface with clean water and dry.

<back to top>

END